In this design, dimension of the proposed antenna is 20 × 25 × 1.6 mm³ with FR4 substrate having circular patch fed with co-planar waveguide (CPW) that operates at numerous resonance frequencies between 5 and 10 GHz. The proposed antenna can be used well for low range communication transceivers in the C and X bands, according to simulation results. The optimal parameters for UWB antenna are the fractional bandwidth, which should be greater than 85%, and VSWR, which is another parameter. For the best and most efficient technique of using printed monopole antenna, the range of Ultra wideband (UWB) bandwidth should be lower than 2. Simulate data suggest that the proposed antenna has outstanding impedance matching capabilities, achieving a peak gain of 8 dBi. Results indicate that the ground plane’s dimensions of 15.9 mm and 11.4 mm are the most suitable for UWB due to its return loss of -41.86 dB, fractional bandwidth of about 89%, and Voltage standing wave ratio(VSWR) of less than 2 within the frequency spectrum. This modified prototype antenna has a decent, omnidirectional radiation pattern.